720-0194 - Actuators - 720 Series Latch Kit - Assembled Simply cut the outer jacket

Simply cut the outer jacket of the push pull cable to the length needed

Block 7: Connect to Ground to extend actuator

The bottom of the bracket has x2 1/4-20 holes and x1 5/16-18 hole for mounting

Availability: Very Limited

720-0194 - Actuators - 720 Series Latch Kit - Assembled Simply cut the outer jacket12VDC, 36" cable output, pivot mounting bracket, 1 inch per second, no feedback. DETAILED INFORMATION Standard 720 Series actuator, which runs on a 12V source, with an output speed of 1 inch per second. Total stroke length is 3 inches, and this unit has a 36" Push Pull cable as its output. This system works via a 6 pole DPDT toggle switch. Terminal block pin out: Block 1: 12V + to motor (RED WIRE) Block 2: 12V to motor (BLACK WIRE) Block 3: Ground to