HOSE WHIP RESTRAINTS (suitable for up to 40K) Part No:43-010-002 - SAFETY WHIP CHECK, NYLON 1-PLY W/ RUBBER GROMMET STOPS (APPROXIMATELY 31-1/2" LONG) such as a water blasting

such as a water blasting lancing or cutting system

40K psi Air Diverter Valve w/o Base Plate Specs Sheet

such as shell-side machines and tower cleaners

Our wide selection of lubricants makes assembling leak-tight connections even easier

HOSE WHIP RESTRAINTS (suitable for up to 40K) Part No:43-010-002 - SAFETY WHIP CHECK, NYLON 1-PLY W/ RUBBER GROMMET STOPS (APPROXIMATELY 31-1/2" LONG) such as a water blastingWe strongly recommend the use of a whip check hose restrainer in any water jetting operation. These are perhaps the simplest and least expensive safety measure to implement. A whip check can be attached at any point where two hoses are joined, to a pump's fluid end at the discharge side, or where a hose attaches to any piece of water jetting equipment, such as a water blasting lancing or cutting system. When a high pressure hose is joined to a piece